-
All the stations and stopping places used for passenger traffic and/or freight traffic.
-
Area < 0.4 km²All TEN ports and all statistical ports according to Commission Decision 2005/366/EC of 4 March 2005. (Reference: GISCO Port database)
-
The vertical datum for the shoreline should be mean sea high water in tidal maritime zone or normal water
-
All dams on watercourse portrayed as a single line
-
Landmark feature, major power stations
-
Usually the sea or ocean area.
-
Land used for growing vegetation.
-
The landmask area is enclosed by the coastline/shoreline and sea limit. It must not depict any lakes or other inland waters. Landmask area serves as reference layer for geometrical coherence between layers
-
For each watercourse with a drainage basin ≥ 500 km2 the main drain class should be indicated.
-
Major waterfalls of national or tourist interest or being obstruction to navigation, located on watercourse portrayed as line feature
-
All European roads (E-roads) and all roads connecting built-up areas, additionally, other roads can be included when it is needed to reach full connectivity of the transportation network (e.g. direct link between two built-up areas) or only way to reach a built-up area or...
-
Cartographic text needed for named place at scale 1:250.000 that cannot be put into attributes. Named locations specially required are regions e.g. Mountain range, Valley, Peak, Gorge, Bay, Sea, Fjord, Inlet/cape, Sandbank, Beach, Headland/Peninsula, Sea water and forest name....
-
Area < 0.4 km2 or population >100 but < 5000 inhabitants. All municipalities and other built-up areas estimated to be important by their number of inhabitants and/or their outstanding localisation. Those built-up areas, which have less than 100 inhabitants but are...
-
The ferry station shall be identified for each ferry line and connected to them. There can be several ferry lines connected to one ferry station. The ferry station will possibly connect railway or road and the corresponding ferry line. The FStationID is the unique...
-
Railway routes used for regular transportation of goods and passengers. Railway yards, siding railways are allowed if they are landmarks and are classified as branch lines. They are usually generalized (not all the tracks have to be portrayed). Specific lines reaching harbour...
-
EnvironmentDaily air temperatures are given in degrees Celsius (°C) and are collated by month for each year from 1961 to 2021 with each file containing a month of data. Mean temperature values can be determined by calculating the average of the maximum and minimum temperature at a point,...
-
The division into counties based on the model used in the English system, was introduced gradually by English settlers from the late 12th century onwards. These land divisions were formed following the Norman invasion of Ireland in imitation of the counties then in use as...
-
EnvironmentDaily rainfall totals are expressed in millimetres (mm) and are collated by year from 1941 to 2021. The daily rainfall total is presented without a decimal point. For example, a value of 123 is equivalent to a daily rainfall total of 12.3 mm. The number of stations available...
-
Townland Boundaries Generalised 20m - OSi National Statutory Boundaries - 2015Ordnance Survey IrelandGovernmentTownland Boundary dataset generalised to 20m, generated from the OSi National Statutory Boundary dataset.
-
Polygon file of the Boundaries Seawater Area taken from the OSi National 1:250k Map Of Ireland
Derilinx
*By submitting this form you consent to subscribing to our mailing-list and receiving information from the Open Data Unit in the Department of Public Expenditure and Reform about open data news and events.